Food/Seasoning

Multi-layer bottles for food and seasoning with barrier layer to prevent oxidization and extend shelf life has become the mainstream. There are many bottles that are displayed at supermarkets that are produced by our blow molding machine.
Extrusion blow molding machine enables to produce bottles with handles without secondary process after taking out from molding machine. We offer the most suitable molding machine meeting your demands with our extensive experiences.

For multi-layer seasoning bottle

Machine Model: MSD-C46A/64MKZ2-AP(C4)

No. of station: Double station

Bottle capacity : 100mL~1L

Die head: 4 parisons

Center distance: 150mm

Screw diameter: φ65/φ40/φ30×2

Clamping force: 150KN

Layer composition: 6-layer 4-kind of resin

Inner Layer Outer Layer
LDPE REG AD EVOH AD LDPE

For multi-layer seasoning tube

Machine Model: MSD-C56V/43M-AP(C2)

No. of station: Double station

Bottle capacity : 10mL~300mL

Die head: 2 parisons

Center distance: 150mm

Screw diameter: φ50/φ35×2/φ25×2

Clamping force: 50KN

Layer composition: 6-layer 4-kind of resin

Inner Layer Outer Layer
LDPE REG AD EVOH AD LDPE

Consumer/Daily packaging

Variety of small-lot products can be produced with one widely useable Extrusion blow molding machine.
Value-added products can be made by adding view-stripe, using glossy resin for outer layer or making highly-designed shape.

For wide capacity range of daily packaging

Machine Model: MSE-55E/54M-AP(E2)

No. of station: Single station

Bottle capacity : 100mL~1L

Die head: 2 parisons

Center distance: 170mm

Screw diameter : φ55

Clamping force: 70KN

Resin: PE/PP

For multi-layer shampoo bottle which have glossy outer layer

Machine Model: MSD-C44A/43R-AP(C2)

No. of station: Double station

Bottle capacity: 50mL~500mL

Die head: 2 parisons

Center distance: 120mm

Screw diameter: φ45/φ30/φ25×2

Clamping force: 50KN

Layer composition: 4-layer 4-kind of resin

Inner Layer Outer Layer
LDPE REG AD EVOH

For mass lot production of daily packaging

Machine Model:INNOVAREX400D

No. of station:Double station

Bottle capacity:0.5L~10L

Die head:3 parisons~12 parisons

Center distance:85mm~350mm

Screw diameter:φ90/φ65/φ65/φ35

Clamping force:400kN

Layer composition:3-layer +view stripe

Layer ratio:20%/60%/20%+view

Printing

Toner cartridges for printers can be also produced with Extrusion blow molding machine.
Our molding machine produces highly compatible product with copier or accessories stably because of high repeatability.
We have wide experience of Extrusion blow molding machine for from business-use big toner cartridge to home-use small cartridge.

For thin and wide shape of toner cartridge of copier for business-use

Machine Model: MB-70E/54L-AP(E1)

No. of station: Single station

Bottle capacity: 500mL~5L

Die head: 1 parison

Center distance: –

Screw diameter: φ70

Clamping force: 120KN

Resin: PE/PP

For small cartridge of home-use printer

Machine Model: MSD-70E/53M-AP(E4)

No. of station: Double station

Bottle capacity: 30mL~300mL

Die head: 4 parisons

Center distance: 90mm

Screw diameter: φ70

Clamping force: 70KN

Resin: PE/PP

Industrial packaging

We design any layer composition that you demand for an inner package of bag in box and chemical bottle. Our machine enables to produce quality product with stable product shape and layer composition because of high repeatability, which makes safety transport possible.

For multi-layer industrial chemical bottle

Machine Model: MFL-C33A/76LJ-A(C1)

No. of station: Single station

Bottle capacity: 10L~20L

Die head: 1 parison

Center distance: –

Screw diameter: φ100/φ65×2

Clamping force: 300KN

Layer composition: 3-layer 3-kind of resin

Inner Layer Outer Layer
HMWPE REG HMWPE

For inner bag of bag-in-box

Machine Model: MF2L-90E/65L2J-A(E1)

No. of station: Single station

Bottle capacity : 10L~20L

Die head: 1 parison

Center distance: –

Screw diameter: φ90

Clamping force: 350KN

Resin: LDPE

Inner Layer Outer Layer
HDPE REG HDPE+MB
HDPE(VS) HDPE(VS)

For single-layer or multi-layer Jerry Can

Machine Model: TJS25A-M

No. of station: Single station

Bottle capacity : 5L~20L

Die head: 1 parison

Center distance: –

Screw diameter: φ80/φ50/φ50

Clamping force: 250KN

Layer composition: 3-layer 3-kind of resin

Layer ratio:20%/60%/20%

Inner Layer Outer Layer
HDPE HDPE HDPE
HMWPE HMWPE HMWPE

Pharmaceutical/Sanitation

Pharmaceutical bottle requires clean environment and exact shape. Demand of antiseptic bottles has been increasing due to recent corona virus that are also our advantage of fully electric machine. Fully electric control realizes eliminating risk of oil adhesion and high repeatability of the machine movements stabilizes product quality.

For spray bottle of antiseptic liquid

Machine Model: MSD-90E/64M02KZ2-AP(E4)

No. of station: Double station

Bottle capacity : 100mL~1L

Die head: 4 parisons

Center distance: 120mm

Screw diameter: φ90

Clamping force: 150KN

Resin: PP/PE

Customized for clean room-use for infusion bottle

Machine Model: MSD-55E/54NZ-A(E4)

No. of station: Double station

Bottle capacity : 30mL~300mL

Die head: 4 parisons

Center distance: 90mm

Screw diameter: φ55

Clamping force: 70KN

Resin: PE/PP

Automobile/Motorcycle

Related with CASE innovation, automobile parts become lighter and lighter by replacing metal parts with plastic. We have had the experience of the machines for automotive parts such as fuel tank and boot shaft. We are willing to challenge to develop new product with our clients.

For multi-layer fuel tank

Machine Model: MSD-C66A/74L-A(C1)

No. of station: Double station

Bottle capacity : 1L~10L

Die head: 1 parison

Center distance: –

Screw diameter: φ80/φ70/φ55/φ35×3

Clamping force: 200KN

Layer composition: 6-layer 6-kind of resin

Inner Layer Outer Layer
HMWPE AD EVOH AD REG HMWPE+MB

For boot shaft of automobile

Machine Model: HPS-50E/05B(T2)

No. of station: Single station

Bottle capacity : 50mL~500mL

Die head: 2 parisons

Center distance: 170mm

Screw diameter: φ50

Clamping force: 50KN

Resin: Elastomer

Large product

Since the October 2021, blow molding machine business for large product has been transferred to TAHARA from JSW, which also includes all of sales, manufacturing, and service maintenance for the future business. A plastic drum, an automotive spoiler, and a large general-purpose tank that were previously out of our targets became possible to produce by TAHARA.
We are also able to produce both continuous extrusion head and accumulator head depending on the requirement.

Large blow molding machine for 200L plastic drum with 3 layers

Machine Model: NEB80/P90*3/W300ML

Station: Single station

Bottle capacity: 200L

Die head: 1 parison

Center distance: –

Screw diameter:φ90mm x 3

Clamping force:800kN

Layer composition: 3-layer 3-kind of resin

Inner Layer Outer Layer
HDPE (clean & natural) HDPE (Including REG) HDPE (Including MB)

Large blow molding machine for automotive spoiler

Machine Model: NB60SII

Station: Single station

Die head: 1 parison

Center distance: –

Accumulating capacity:9L

Screw diameter:φ120

Clamping force:600kN

Resin: ABS material

Products

Single Station Machine

The list of our machines is below. In addition, we manufacture machines on your specification.

MSE-35D/32M MSE-45E/43M MSE-55E/54M MSE-70E/65LKZ2 MB-65E/54M MB-80E/65C MF-100F/76LJ
Extruder Diameter*1 φ35 φ45 φ55 φ70 φ65 φ80 φ100
Clamping Force (kN) 30kN 50kN 70kN 150kN 120kN 200kN 200kN~300kN
Max. Mountable Mold Width (mm)*2 220mm 280mm 380mm 600mm 380mm 550mm 740mm
Max. Mountable Mold Height (mm) 240mm 300mm 370mm 480mm 415mm 520mm 620mm
Max. Mountable Mold Thickness (mm) 85mm
(One side)
95mm
(One side)
120mm
(One side)
150mm
(One side)
120mm
(One side)
95mm
(One side)
280mm
(One side)
Daylight (The space between platens) (mm) 280mm 320mm 420mm 600mm 420mm 500mm 1000mm
Mold Slide Stroke (mm) 240mm 300mm 395mm 650mm 395mm 650mm 850mm
Machine Layout Width (mm) *A 1170mm 2100mm 2420mm 3510mm 2250mm 3315mm 2700mm
Machine Layout Height (mm) *B 2350mm 2460mm 2520mm 3095mm 2625mm 3085mm 3810mm
Machine Layout Depth (mm) *C 2690mm 3200mm 3515mm 4620mm 3715mm 4390mm 5770mm
Machine Weight (ton) approx3.0ton approx4.5ton approx6.0ton 15.0ton approx10.0ton approx10.0ton approx20.0ton
Dry Cycle Time (sec) 2.0s 2.2s 2.2s 4.0s 2.8s 4.5s 6.0s
Two Parisons Pitch (mm)*3 90mm 120mm 170mm 220mm 170mm 230mm
4 Parisons Pitch(mm) 45mm 60mm 80mm



*1 : We offer 13 types of extruders in φ20 – φ100 diameter.​
*2 : Beside the list, we offer clamping units in various size and clamping force on your needs.​
*3 : We propose the number of heads on your needs.

Double Station Machine

The list of our machines is below. In addition, we manufacture machines on your specification.

MSD-40E/32M2 MSD-55E/43M MSD-70E/54M MSD-90E/65MK MBD-80E/54M MBD-90E/65F MFD-100F/76LJ
Extruder Diameter*1 φ40 φ55 φ70 φ90 φ80 φ90 φ100
Clamping Force (kN) 30kN 50kN 70kN 150kN 120kN 200kN 200kN~300kN
Max. Mountable Mold Width (mm)*2 220mm 280mm 380mm 530mm 415mm 530mm 740mm
Max. Mountable Mold Height (mm) 240mm 300mm 370mm 480mm 415mm 470mm 620mm
Max. Mountable Mold Thickness (mm) 90mm
(One side)
95mm
(One side)
120mm
(One side)
120mm
(One side)
120mm
(One side)
175mm
(One side)
280mm
(One side)
Daylight (The space between platens) (mm) 280mm 320mm 420mm 460mm 420mm 770mm 1000mm
Mold Slide Stroke (mm) 240mm 330mm 425mm 565mm 425mm 950mm 1350mm
Machine Layout Width (mm) *A 2530mm 3724mm 4214mm 5548mm 4349mm 5120mm 4730mm
Machine Layout Height (mm) *B 2525mm 2507mm 2610mm 3243mm 2915mm 3500mm 3810mm
Machine Layout Depth (mm) *C 4208mm 3465mm 4350mm 5070mm 4600mm 5100mm 6560mm
Machine Weight (ton) 7.0ton 9.0ton 10.0ton 19ton 11.0ton 22.0ton approx32.0ton
Dry Cycle Time (sec) 2.1s 2.5s 3.5s 4.0s 3.5s 5.7s 6.0s
Two Parisons Pitch (mm)*3 90mm 120mm 170mm 240mm 170mm

4 Parisons Pitch(mm) 45mm 60mm 80mm 120mm 90mm

*1 : We offer 13 types of extruders in φ20 – φ100 diameter.​
*2 : Beside the list, we offer clamping units in various size and clamping force on your needs.​
*3 : We propose the number of heads on your needs.

Multilayer Molding Machine

The list of our machines is below. In addition, we manufacture machines on your specification.

MBD-C46V/54M-AP(C2) MSD-C44A/64MKZ2-AP(C4) MBD-C55A/54M-AP(C2)
The Number of Layers 6 layers 4 layers 5 layers
Layer Composition (Inner Layer – Outer Layer) PE/REG/AD/EVOH/AD/PE HDPE/REG/HDPE+
​(HDPE(View Stripe))
PA/AD/REG/HDPE+​
(HDPE(View Stripe))
Use Seasoning / Food / Cosmetics Automotive Oil / Daily Necessities Agricultural Chemicals
Extruder Diameter*1 φ40・35・20・20 φ80・70・65・30 φ65・40・40・35・30
The Number of Parisons*2 2 4 2
Head Pitch 240mm 140mm 180mm
Clamping Force (kN) 70kN 150kN 70kN
Max. Mountable Mold Width (mm)*3 380mm 600mm 380mm
Max. Mountable Mold Height (mm) 415mm 410mm 415mm
Max. Mountable Mold Thickness (mm) 120mm(One side) 120mm(One side) 120mm(One side)
Daylight (The space between platens) (mm) 420mm 460mm 420mm
Mold Slide Stroke (mm) 425mm 650mm 425mm
Max. Capacity of the Container (L)*4 150mL 1000mL 1000mL
Min. Capacity of the Container (L)*4 30mL 100mL 100mL
Machine Layout Width (mm) *A 3230mm 6024mm 3230mm
Machine Layout Height (mm) *B 3230mm 3720mm 3230mm
Machine Layout Depth (mm) *C 5000mm 5905mm 5100mm
Machine Weight (ton) 15ton 25ton 15ton
Dry Cycle Time (sec) 4.0s 5.0s 4.0s

*1 : We offer 13 types of extruders in φ20 – φ100 diameter.​​
*2 : We propose the number of heads on your needs.​​
*3 : Beside the list, we offer clamping units in various size and clamping force on your needs.​
*4 : Capacity of the containers may vary depending on their shape.

Machine Layout Width (mm) *A
Machine Layout Height (mm) *B
Machine Layout Depth (mm) *C